Adding a New Site Placeholder
You can add a new site placeholder.
|
➢
|
To add a new site placeholder: |
|
1.
|
Open the Site Configuration page (Setup > Configuration > Site Configuration). |
|
2.
|
Under Site Configuration, provision devices using the 'Configuration Set' parameter and the corresponding 'Configuration Key' and 'Configuration Value' parameters that are auto-populated after selecting a device model. |
|
3.
|
Under the Site Placeholders section of the page, click the +Add new placeholder button. |
|
4.
|
From the 'Name' field drop-down, select the name of the new placeholder. |
|
5.
|
In the 'Value' field, enter the value of the new placeholder. |
|
6.
|
From the
'Site' drop-down, select a site to which the phone will automatically be provisioned. |
Prior to version 7.8, Poly phones could only be provisioned to 'AutoDetection' by default. As of version 7.8, the
'Site' drop-down enables selecting a site to which Poly phones will also be automatically provisioned.
|
7.
|
Click Save; the new placeholder is added to the table. |